Short answer
Check ten risks before odor removal starts. They are gas or sewer leaks, biological sources, mold, chemical mixing and fumes, and ozone exposure. They also include fire from foggers, hazards hidden in walls and floors, tight or hot work spaces, people and pets at higher risk, and damage to your belongings. Spotting each one first protects everyone in your home and the crew. It keeps a smell problem from turning into a health problem.
Why check safety before you tackle a smell
Odor removal can look like a simple cleaning job, but smells are signals. Some point to harmless sources, such as old cooking grease. Others point to leaking gas, sewage, a death, or mold. The tools used to fix the problem carry risks of their own. These include strong chemicals, ozone, and thermal foggers.
A short safety check before work begins changes the order of the job. It decides what comes first. That may be a call to the utility, protective gear, or a search for moisture. Or it may simply be moving your family and pets out for a day.
Use the ten risks below as a checklist. It works whether you are hiring a company or reviewing a plan one has given you.
None of these risks means the job cannot go ahead. Most are handled with a phone call, a change in the order of work, the right protective gear, or a few hours out of the house. The danger comes from skipping the check and finding a hazard halfway through the work.
- 1. Gas leaks and sewer gas
- 2. Biological sources such as a death, waste, or rodents
- 3. Mold and hidden moisture
- 4. Chemical mixing and cleaning fumes
- 5. Ozone exposure
- 6. Foggers that can catch fire, and things that can light them
- 7. Hidden hazards exposed during tear-out
- 8. Tight, hot, or hard-to-reach work areas
- 9. People and pets at higher risk
- 10. Damage to belongings and building materials
Risks 1 and 2: gas, sewer gas, and biological sources
Risk 1 is the most urgent. A rotten-egg or sulfur smell can come from natural gas, which has a scent added so you can notice it. It can also come from sewer gas that contains hydrogen sulfide. Both need attention before any cleaning. For hydrogen sulfide, NIOSH sets a 10-minute ceiling of 10 ppm and classifies 100 ppm as immediately dangerous to life or health, according to its 2019 Pocket Guide.
If you suspect gas, leave the building. Do not use switches, phones, or flames inside. Call the utility or 911 from outside. For sewer odors, a plumber may need to check for dry drain traps, broken vent pipes, or failed seals before odor work can begin.
Risk 2 is a biological source. A death in the home, large amounts of pet or human waste, rodent nests and droppings, and sewage backups can all carry germs that cause disease. These sources call for protective gear and careful removal. In many cases the waste must be handled under special rules. A good company will spot them during the inspection and change the plan to fit.
Carbon monoxide belongs here as well. It has no smell. But a burning smell from a furnace, water heater, or fireplace can come with a venting problem. If you notice exhaust smells, headaches, or dizziness indoors, get outside. Have your fuel-burning appliances checked before any odor work begins.
Risk 3: mold and hidden moisture
Musty smells often mean moisture, and moisture often means mold. Mold can grow behind drywall, under flooring, in crawlspaces, and inside your heating and cooling system long before you can see it.
Disturbing moldy materials during odor work can release spores into the air. Before any tear-out, a careful company checks for moisture with meters or heat-sensing cameras. If mold is likely, it seals off the work area. People with asthma, allergies, or weak immune systems should stay away from the work area.
Fixing the moisture source, such as a leak or poor airflow, comes first. If it is not fixed, the odor and mold return after the cleanup.
Ask whether the company will hang plastic sheets and run fans that pull air out of the work area while damp materials are removed. Those steps keep spores and dust from moving through your house while the source is cut out.
Risk 4: chemical mixing and fumes
Odor removal uses enzymes, oxidizers, solvents, and sealers. Many are safe when used as the label says. But some give off fumes, and certain mixes are dangerous. Bleach mixed with ammonia or acids can release toxic gases.
Ask the company which products it will use, and ask for the safety data sheets. Confirm how your space will be aired out during and after the work and when it is safe to return.
If you have tried treatments of your own, tell the technician exactly what you used. Residue from a product you put down could react with the company's chemicals.
Workers face the same exposure over many jobs. A careful crew wears breathing protection, gloves, and eye protection that match the products in use. It takes breaks in fresh air when working with strong products in small rooms.
Risk 5: ozone exposure
Risk 5 is ozone. Ozone generators can help with certain odors, but the gas irritates the lungs. OSHA's legal limit for ozone in workplace air is 0.1 ppm (0.2 mg/m3), averaged over an 8-hour shift, according to its 2024 chemical database. Treatment levels are usually far higher than that. So your space must be empty of people, pets, and plants. It must be sealed during treatment and aired out before anyone goes back in.
Ask the company how it will keep anyone from entering and how long the treatment will run. Ask how it will confirm the space is safe. Ozone can also break down rubber, some plastics, and fabrics.
Risk 6: foggers and fire
Risk 6 is fire. Thermal foggers heat deodorizing liquids, and some of those liquids can catch fire. Pilot lights, candles, and sparks from appliances can set off a fog. A careful company shuts off anything that could light it and follows the labels on the equipment and the liquid. It never leaves a running fogger alone in a way the label does not allow.
Risk 7: hidden hazards behind walls and floors
Risk 7 covers what is hidden behind your walls and floors. Cutting drywall or pulling up flooring can expose electrical wiring, plumbing, and gas pipes. In older buildings, some flooring, joint compound, pipe insulation, or paint may contain asbestos or lead. A good company asks how old your building is. It arranges testing when needed before it disturbs any suspect material.
Sharp objects can also turn up during removal. These include nails, carpet edge strips, broken glass, and in some homes used needles. Workers need cut-resistant gloves and careful handling habits.
Risk 8: tight, hot, or cramped work spaces
Risk 8 is the work space itself. Attics can be dangerously hot. Crawlspaces may have poor air, pests, and standing water. Closets and cabinets leave little room to move. Some spaces may count as confined spaces with special safety rules. Ask how the crew will manage heat, fresh air, lighting, and access in these areas of your home.
Risk 9: people and pets at higher risk
Some people and animals are more sensitive to chemicals, dust, and air treatments. Infants, older adults, and pregnant people may need to leave during some stages. So may anyone with asthma, allergies, or a heart or lung condition.
Your pets need special care. Birds are extremely sensitive to chemicals in the air and should be moved well away from treated areas. Fish tanks may need to be covered or moved. Cats and dogs should not return until surfaces are dry and the air has cleared.
Tell the company who lives in your home and about any health concerns. Then it can plan the schedule and choose products to fit.
If someone in your home needs medical equipment, such as oxygen or a nebulizer, tell the company before work begins. Oxygen equipment should be kept far from foggers, heat sources, and any treatment that could create a fire risk.
Risk 10: damage to your belongings and materials
Oxidizers can bleach fabrics and carpets. Ozone can crack rubber and fade some materials. Moisture from cleaning can warp wood floors or damage electronics. Sealers can stain surfaces they are not meant for.
Ask what you should remove or cover before work begins. Think of artwork, heirlooms, musical instruments, electronics, and houseplants. A good company will point out fragile items and suggest safe storage.
Take photos of your valuable belongings before work begins. If something is damaged, clear records help settle the matter.
Clothing and fabrics stored in treated rooms can pick up leftover chemical smells. Bag your stored clothing, bedding, and linens or move them out of the area. Or ask the company whether they should be cleaned on their own after the job.
How a safety check reshapes the plan
To see how a safety check reshapes a plan, take a made-up basement job, not a real customer's. A family calls about a strong, sour smell in the basement of a 1950s home after a long vacation. During the inspection, the technician notices the smell is strongest near a floor drain. The family's parakeet cage is nearby.
The technician checks the drain trap and finds it dry, which can let sewer gas into the home. The family is told to call a plumber, who refills the trap and repairs a cracked vent pipe. Moisture readings then show damp drywall near the laundry area. Given the home's age, the technician suggests testing the joint compound before cutting.
The parakeet goes to a relative's home until the job is done. The work plan now includes plastic walls around the drywall removal, a carbon filter machine, and a low-odor sealer. Ozone is ruled out because the older boiler system has many rubber gaskets. The safety check added a day but prevented several hazards. If testing does find asbestos or lead in your home, ask the company which licensed contractor and disposal site will handle those materials.



